Determining the appropriate use of Technology Enabled Care Services (TECS) to manage upper-limb trauma injuries during the COVID-19 pandemic: A multicentre retrospective observational study.

BACKGROUND: The COVID-19 pandemic created a unique opportunity to explore the use of Technology Enabled Care Services (TECS), which remains novel for many service providers. This study assesses the factors that affect adaptation to remote monitoring of patients after upper-limb trauma injury. A standardised risk-stratified screening tool is further developed here to support clinical staff in both the determination of appropriate use of TECS and the optimisation of patient care. OBJECTIVES: 1: To explore the patient and injury factors that determine the appropriate use of TECS for patients with upper-limb injury. 2: To use these findings to refine a standardised screening tool for the appropriate choice of follow-up format. METHODS: A retrospective review of patient management was undertaken across three NHS upper-limb trauma units during the first UK COVID-19 lockdown. Data were collected, and themes were analysed across a number of predetermined categories. This was underpinned by a review of contemporary policy guidance and literature. RESULTS: A total of 85% of patients were offered an appropriate format of follow-up; this was defined by the ability to achieve desired patient-clinician goals and lack of complications. Key factors in determining appropriate follow-up included extent of injury, mental health considerations, and the need for face-to-face (F2F) assessment and treatment. CONCLUSION: Study findings demonstrate consistency between units in the factors determining the appropriate use of TECS. The refined screening tool provides a risk-stratified, standardised approach to the choice of follow-up format, F2F or TECS. It is hoped that this will support future clinical decision-making processes to ensure optimal patient care.

Free tissue transfer for burns reconstruction: A single-site experience.

This study reviews free tissue transfer (FTT) surgery for both acute wound and reconstructive scar management of burn injuries at a UK burns unit over a 10-year period. Thirty eight patients underwent 46 FTTs, or free flaps, as part of their burn injury pathway. For the cohort of patients, there was one flap failure, which occurred for a secondary scar reconstruction. It is noted that FTT was successful for all seven acute or primary interventions. Anterolateral thigh flap was the most frequently performed (57%); followed by parascapular flaps (22%) of which 43% were pre-expanded. A method of pre-expansion for neck contractures and a novel technique of anchoring this flap to the pre-tracheal fascia are described here. This can provide the patient with good neck contouring by using the capsule to hitch the flap into a good position. It is clear that further work is required to study the prevention of hypertrophic scarring that can occur at the interface between flap and adjacent skin, where occurrence rate in this cohort was 17%. It is proposed that FTT now provides a viable solution both to the coverage of complex burn wounds and to the revision of scar contractures. Consensus over an FTT protocol for the primary management of open burn wounds is seen as the logical next step for this surgical intervention.

The lived experience and quality of life with burn scarring-The results from a large-scale online survey.

A large-scale online survey was designed to both inform and direct the development of an online community healthcare hub for people living with scarring. Focussed areas of questioning were generated to gather information on psychological symptoms, scar support and knowledge of wounds and healing. Simple statistical data was produced on the severity, aetiology and location of scarring. A secondary data analysis of the survey responses was conducted on more focussed themes. This survey was completed by 1034 people living with scars, 119 of which had burn scarring. The results highlight that patients with burn scars have higher levels of pre-existing psychological difficulties, carry a greater number of scars and experience more symptoms. A lack of support is identified for patients with scars once they have been discharged by their healthcare provider. The most popular forms of support were chosen as face-to-face interaction or online support. Key areas of support were found to be psychology particularly for help with acceptance or coping methods, wound care advice and meeting with other patients with scars. For these patients, key themes in the psychological impact of scarring include appearance-related concerns, social anxiety, acceptance and coping, experience of symptoms, skin viability and survivorship.

Characterisation of Elastic and Acoustic Properties of an Agar-Based Tissue Mimicking Material.

As a first step towards an acoustic localisation device for coronary stenosis to provide a non-invasive means of diagnosing arterial disease, measurements are reported for an agar-based tissue mimicking material (TMM) of the shear wave propagation velocity, attenuation and viscoelastic constants, together with one dimensional quasi-static elastic moduli and Poisson's ratio. Phase velocity and attenuation coefficients, determined by generating and detecting shear waves piezo-electrically in the range 300 Hz-2 kHz, were 3.2-7.5 ms(-1) and 320 dBm(-1). Quasi-static Young's modulus, shear modulus and Poisson's ratio, obtained by compressive or shear loading of cylindrical specimens were 150-160 kPa; 54-56 kPa and 0.37-0.44. The dynamic Young's and shear moduli, derived from fitting viscoelastic internal variables by an iterative statistical inverse solver to freely oscillating specimens were 230 and 33 kPa and the corresponding relaxation times, 0.046 and 0.036 s. The results were self-consistent, repeatable and provide baseline data required for the computational modelling of wave propagation in a phantom.

Variations in laser energy outputs over a series of simulated treatments.

BACKGROUND: Test patches are routinely employed to determine the likely efficacy and the risk of adverse effects from cutaneous laser treatments. However, the degree to which these represent a full treatment has not been investigated in detail. OBJECTIVES: This study aimed to determine the variability in pulse-to-pulse output energy from a representative selection of cutaneous laser systems in order to assess the value of laser test patches. METHODS: The output energies of each pulse from seven cutaneous laser systems were measured using a pyroelectric measurement head over a 2-h period, employing a regime of 10-min simulated treatments followed by a 5-min rest period (between patients). RESULTS: Each laser system appeared to demonstrate a different pattern of variation in output energy per pulse over the period measured. CONCLUSIONS: The output energies from a range of cutaneous laser systems have been shown to vary considerably between a representative test patch and a full treatment, and over the course of an entire simulated clinic list.

Prevention or treatment of hypertrophic burn scarring: a review of when and how to treat with the pulsed dye laser.

The purpose of this review is to investigate the use of Pulsed Dye Laser (PDL) as a therapeutic tool for hypertrophic burns scarring. The difference between keloids and hypertrophic scars is first described. The review then outlines the progress and assessment of hypertrophic scars for burns patients and the problem of their clinical management. The assessment using both objective and subjective measurements for complete account of hypertrophic scars is explained. The efficacy of PDL for both prevention and treatment is summarised for all hypertrophic scarring and the various laser treatment protocols in previous research is studied. The differentiation between prevention and treatment is discussed in relation to scar duration and the need for prevention rather than treatment is then proposed for intervention using PDL. The paper concludes with recommendations for future research through a prospective randomised, controlled study using 595 nm PDL in the prevention of scars with less than 6 month duration.

Carotid atherosclerotic plaque characterisation by measurement of ultrasound sound speed in vitro at high frequency, 20 MHz.

This study aimed to utilise a tissue mimicking material (TMM) in order to embed in vitro carotid plaque tissue so that its acoustic properties could be assessed. Here, an International Electrotechnical Commission (IEC) agar-based TMM was adapted to a clear gel by removal of the particulates. This clear TMM was measured with sound speed at 1540 ms(-1) and an attenuation coefficient of 0.15 dB cm(-1)MHz(-1). Composite sound speed was then measured through the embedded material using a scanning acoustic microscope (SAM). Both broadband reflection and transmission techniques were performed on each plaque specimen in order to ensure the consistency of the measurement of sound speed, both at 21 °C and 37 °C. The plaque was measured at two temperatures to investigate any effect on the lipid content of the plaque. The contour maps from its associated attenuation plots were used to match the speed data to the photographic mask of the plaque outline. This physical matching was then used to derive the sound speed from the percentage composition seen in the histological data by solution of simultaneous equations. Individual speed values for five plaque components were derived; TMM, elastin, fibrous/collagen, calcification and lipid. The results for derived sound speed in the TMM were consistently close to the expected value of soft tissue, 1540 ms(-1). The fibrous tissue showed a mean value of 1584 ms(-1) at 37 °C. The derived sound speeds for elastic and lipid exhibited large inter-quartile ranges. The calcification had higher sound speed than the other plaque components at 1760-2000 ms(-1). The limitations here lay in the difficulties in the matching process caused by the inhomogeneity of the plaque material and shrinkage during the histological process. Future work may concentrate on more homogeneous material in order to derive sound speed data for separate components. Nevertheless, this study increases the known data ranges of the individual components within a plaque. This information may be used help to assess the mechanical properties and structural integrity and its associated vulnerability or risk of embolization in future diagnostic ultrasound techniques.

The acoustic properties, centered on 20 MHZ, of an IEC agar-based tissue-mimicking material and its temperature, frequency and age dependence.

The purpose of this study was to characterize the ultrasonic properties of agar-based tissue-mimicking materials (TMMs) at ultrasound frequencies centered around 20 MHz. The TMM acoustic properties measured are the amplitude attenuation coefficient alpha (dB cm(-1)MHz(-1)), the speed of sound (ms(-1)) and the backscattered power spectral density (distribution of power per unit frequency normalized to the total received power) characteristics of spectral slope (dB MHz(-1)), y-axis intercept (dB) and reflected power (dB). The acoustic properties are measured over a temperature range of 22 to 37 degrees C. An intercomparison of results between two independent ultrasound measurement laboratories is also presented. A longitudinal study of the acoustic properties over a period of two years is also detailed, and the effect of water immersion on the acoustic properties of TMM is measured. In addition, the physical parameters of mass density rho (kg m(-3)) and specific heat capacity C (J kg(-1) K(-1)) are included. The measurement techniques used were based on the substitution technique using both broadband and narrowband pulses centered on 20 MHz. Both the attenuation coefficient and speed of sound (both group and phase) showed good agreement with the expected values of 0.5 dB cm(-1) MHz(-1) and 1540 ms(-1), respectively, with average values over the three-year period of 0.49 dBcm(-1)MHz1 (SD +/- 0.05) and 1540.9 ms(-1) (SD +/- 8.7). These results also showed agreement between the two independent measurement laboratories. Speed of sound and attenuation coefficient were shown to change with temperature with rates of + 2.1 m s(-1) degrees C(-1) and -0.005 dB cm(-1) MHz(-1) degrees C(-1), respectively. Attenuation changed linearly with frequency at the high frequency range of 17 to 23 MHz, and speed of sound was found to be independent of frequency in this range. The spectral slope of relative backscattered power for the material increased with frequency at typically 1.5 dB MHz(-1). This compared favorably with theoretical spectral slope values, calculated for a variety of scatterer sizes, albeit at a lower frequency range. It is also noticed that, on extrapolation back to lower frequencies, the backscatter is comparable with that measured at 7 MHz. Overall, this non-commercial agar-based TMM is shown to perform as expected at the higher frequency range of 17 to 23 MHz and is seen to retain its acoustic properties of attenuation and speed of sound over a three-year period.